Item Number: DUM1813

This is the radio controlled, electric powered
Dumas Aeronca C-3 Park Flyer Kit.

FEATURES

Construction: Hand selected laser cut balsa
Vacuum molded nose cowl
Rudder Control: Pull-pull cables
Elevator Control: Wire pushrod
Servo Placement: Mounted in rails on fuselage
Landing Gear: 1/16" diameter wire front, .041 diameter wire rear,
requires bending

INCLUDES

All balsa, lightweight colored (black and yellow) tissue covering
two 1-3/4" (45mm) lightweight foam main wheels, CA hinges and all
hardware to complete this kit, instruction manual, two full-size
plan sheets, and acetate sheet for windows

REQUIREMENTS

GWS IPS (indoor power system) motor with "A" ratio gear drive
GWSG2023
3 channel radio system (minimum)
2 micro servos
5A ESC w/BEC GWSM2059
2 cell 700mAh LiPo battery
GWS 8x6 prop, GWSQ2017
Building and field equipment

SPECIFICATIONS

Length: 22" (559mm)
Wingspan: 40" (1016mm)
Wing Area: 329 sq.in. (21.25 sq dm)
Airfoil: Flat bottom, high wing placement
Center of Gravity (CG): 2.5" (63mm) back from the leading edge of the
wing at the fuselage side
Control Throws-
Elevator, Up and Down: 3/4" (19mm)
Rudder, Left and Right: 1" (25mm)